Eoplly New Energy Technology Co., Ltd.

	Solar cells
	Solar modules
	PV systems
	Solar tracking control system
	Project cases
	Quality control

Products

Product Name: 6KW连杆式跟踪系统

Inquiry:

特点：
耗电低
提高发电量高达35％
适用于各种天气
抗风等级高达120KM/h

巡日跟踪系统参数
Solar tracking system’s parameters

参数Parameters	1kw	6kw	3.6KW	10kw
结构材料Structural material	热镀锌 Hot-dipped galvanized	热镀锌 Hot-dipped galvanized	热镀锌 Hot-dipped galvanized	热镀锌 Hot-dipped galvanized
组件数量 Number of pv modules	6	12*3	21	60
组件规格 Module standard	160w~185w	160w~185w	160w~185w	160w~185w
组件最大表面积 Max surface of total modules	7.66m²	15.32m²*3	26.8m²	70.66m²
组件最大生成功率 Peak power generation	1110w	2220w*3	3885w	11100w
控制方式 Control method	单体非远程 Monomer non-remote	连杆非远程 Linkage non-remote	单体非远程 Monomer non-remote	单体非远程 Monomer non-remote
系统重量(除组件和地基) Weight(w/o modules & base)	298kg	1500kg	1100kg	4820Kg
系统最大载重 Max load	92kg	554kg	321kg	918kg
跟踪轴数量 Number of axis	1	1	2	2
垂直方向角度范围(仰角) Rotationofhorizontalaxis (elevation)	依安装区域定制 Based on installed location		60⁰	60⁰
水平方向角度范围(方位角) Rotation of vertical axis (azimuth)	120⁰	120⁰	180⁰	270⁰
探测器 Detector	CC2005SC	CC2005SC	CC2005SC	CC2005SC
方位角追踪原理 Azimuth tracking principle	通过探测器和控制器的联合作用，使主站太阳能电池板实时追踪太阳，拉动同组电站，保持太阳光和太阳能电池板的相对垂直。 Coupling with controller and detector,the panels in main station track the sun real-time and pull the stations in the same group to keep the panels always be vertical to sunlight		控制器通过探测器传递的感光信号控制回转支承转动保持太阳光和太阳能电池板的同步。 Through photosensitive signals from detector,controller makes the rotary support turn and keeps the panels always be vertical to sunlight
仰角追踪原理 Elevation tracking principle			控制器通过探测器传递的感光信号控制销轮转动保持太阳光和太阳能电池板的相对垂直。 Through photosensitive signals,controller makes pin-wheel turn and keeps the panels always be vertical to sunlight	控制器通过探测器传递的感光信号控制电动推杆转动保持太阳光和太阳能电池板的相对垂直。 Through photosensitive signals,the controller makes electric drive pusher turn and keeps the panels always be vertical to sunlight
电机电源供应 Motor/power supply	12VDC/50Hz	24VDC/50Hz	24VDC/50Hz	24VDC/50Hz
系统平均耗电量 Average power consumption (wh)	<5wh	<19wh	<20wh	<50wh
系统年平均提高率(左右) Average increased effiency (around)	40%	25%	42%	42%
抗风保护系统 Wind-resistant protection	No flat		Flat when wind speed reaches 85km/h
最大抗风 Max wind resistance	75~88 km/h		<130km/h
宽度（不含阴影） Width (w/o shadow)	2500mm	7144mm	4820mm	8550mm
长度（不含阴影） Length (w/o shadow)	2880mm	15352mm	5972mm	10346mm
跟踪系统高度 Height	2646mm	依安装区域定制 Based on installed location	4400mm	4700mm
电站最大占地面积（含阴影） Max occupied space (wshadow)	35m²	380m²	150m²	620m²
地基材料 Base material	C20	C20	C20	C30
地基外径尺寸 Outer dimension of base	Φ210 mm， Φ350 mm， Φ350 mm	Φ130 mm， Φ130 mm， Φ280 mm	Φ1500mm	Φ1600mm

太阳能巡日控制系统特点/Solar Tracking System Key Features of Solar Trackers：
1. 巡日控制系统微低能耗/ Extremely low energy cost;
2. 与固定光伏系统比较，全年平均提高发电量 45%左右; /About 45% increased energy output annually over fixed installation system;
3. 适用各类天气（风、雨、雪、沙尘等各种恶劣天气）及环境条件/All-weather (suitable for harsh environmental conditions: windy,stormy,snowy, dust storm etc.);
4. 抗风性能：可实现 8~9级风速下放平功能（双轴） /Highly wind-proof. The panels (Two axis) change to a horizontal position when the wind reaches 80 km/h;
5. 满足有效日照时间内全程巡日控制/Effective tracking of sun movement with maximal energy capture;
6. 阴雨天的干扰光源切除（信号弹、礼花炮、高层建筑霓虹灯）/Resection of interference by strong light sources during overcast days (flare signals, flash lights, strong neon lights on high buildings);
7. 夜间控制系统供电切除，控制系统处于休眠状态，以最大程度节省无效耗能/Programmed to go into “ sleep mode ” at night to save energy;
8. 夏季日照时间长时，以时间控制方式保持巡日系统位于西端获取太阳能，以最大程度地充分利用太阳下山前的余光/Programmed to extend the exposure time in the summer during sunset period to maximize solar energy collection;
9. 一天跟踪完成后，自动回复到等待次日太阳升起时的状态/Programmed to return to East facing starting position after daily tracking.

Clicks: 710